FixVault
Home › Chevrolet › 2021 › Traverse L › Repair and Diagnosis › External Pages › Different car › Section 55 (Antilock Brake System) › Diagnostic Information and Procedures › DTC C10EE › Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2020 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ensure that the tires are inflated to the proper pressure.
  2. Confirm that all tires are of the proper size and the same model and brand. If a mis-sized or non-matching tire model is present, inform the customer that in order for the vehicle stability system to function normally, tires need to have a uniform size and rolling diameter.
    • If not correct 
    1. Repair or replace as necessary
    2. Ignition - On / Vehicle - In Service Mode
    3. Under normal operating conditions:Verify DTC C10EE is not set.
      • If the DTC sets - Replace the component:K160 Brake System Control Module
      • Go to next step: If no DTC is set
    4. All OK.
    • Go to next step: If correct 
  3. Under normal operating conditions:Verify DTC C10EE is not set.
    • If the DTC sets - Replace the component:K160 Brake System Control Module
    • Go to next step: If no DTC is set
  4. All OK.
About FixVault