Installation Procedure
WARNING: This page is about a different car, the 2020 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
Slide the high mount stop lamp (1) into position.
Ensure the mounting tabs on the top of the high mount stop lamp (1) are aligned with the slots on the rear of the roof structure (2).
While holding in place, align the retaining tabs and secure the high mount stop lamp (1) with and forward upward motion.
- Connect the electrical connector.
- CAUTION:
Refer to Fastener Caution .
High Mount Stop Lamp Bolt (1) - Install and tighten [2x] - Fastener Specifications
High Mount Stop Lamp Opening Cover (1) - Install
Apply pressure upward on the high mount stop lamp cover (1) to engage the retaining tabs.
- Ensure the retaining tabs have engaged and the high mount stop lamp cover (1) is fully seated to the headlining trim panel (2).