FixVault
Home › Chevrolet › 2021 › Traverse L › Repair and Diagnosis › External Pages › Different car › Section 63 (Lighting System - Repair Instructions) › Repair Instructions › Instrument Panel Compartment Lamp Replacement › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2020 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:

Refer to SIR Inflator Module Handling and Storage Warning .

WARNING:

Refer to SIR Warning .

  1. Disable the SIR system. SIR Disabling and Enabling
  2. GM5421737Courtesy of GENERAL MOTORS COMPANY

    With a flat bladed plastic trim tool, start at the front and work your way back to release the clips.

  3. Instrument Panel Outer Trim Cover - Right Side (1) - Remove
  4. Disconnect electrical connections, if applicable.
  5. GM5312731Courtesy of GENERAL MOTORS COMPANY

    Body Control Module Bracket Bolt (1) - Remove

  6. Unlock and lower the body control module bracket (2).
  7. Disconnect and reposition harness as necessary.
  8. GM5312733Courtesy of GENERAL MOTORS COMPANY

    Instrument Panel Insulator Bolt (1) - Remove [4x]

    9. NOTE:

    Use a plastic trim tool if necessary.

  9. Release the tab from the instrument panel lower trim panel insulator.
  10. GM5312734Courtesy of GENERAL MOTORS COMPANY

    Instrument Panel Lower Trim Panel Insulator (1) - Remove

  11. Disconnect the electrical connectors.
  12. GM5443248Courtesy of GENERAL MOTORS COMPANY

    Instrument Panel Lower Airbag Nut (1) - Remove [2x]

  13. Instrument Panel Lower Airbag - Passenger Side (2) - Remove
  14. Disconnect the electrical connector.
  15. GM5423236Courtesy of GENERAL MOTORS COMPANY

    Instrument Panel Compartment Bolt (1) - Remove [5x]

  16. GM5423237Courtesy of GENERAL MOTORS COMPANY

    Instrument Panel Compartment (1) - Remove

  17. Disconnect the electrical connectors.
  18. GM5448250Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Ensure the instrument panel compartment dampener tab is set aside for ease of installation.

    With the instrument panel compartment door (1) open, use a suitable flat bladed plastic trim tool to release the instrument panel compartment dampener tab (2).

  19. GM5448254Courtesy of GENERAL MOTORS COMPANY

    Squeeze the outer edges of the instrument panel compartment door (1) to release and allow for additional access.

  20. GM5448256Courtesy of GENERAL MOTORS COMPANY

    Rotate the instrument panel compartment lamp (1) a quarter turn counter clockwise to release.

    21. NOTE:

    Observe the mounting and location of the wiring harness to ensure proper reinstallation.

  21. Release the wiring harness from the upper retaining tab.
  22. GM5448257Courtesy of GENERAL MOTORS COMPANY

    Release the wiring harness from the side and rear retaining tabs.

  23. Release the retaining tabs at the rear of the instrument panel compartment lamp (1).
  24. GM5448260Courtesy of GENERAL MOTORS COMPANY

    Instrument Panel Compartment Lamp (1) - Remove

About FixVault