Removal Procedure
WARNING: This page is about a different car, the 2020 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
Refer to Glass and Sheet Metal Handling Warning .
Use a small flat-bladed tool to pull and release the rear compartment lid latch cover (1).
- Rear Compartment Lid Latch Cover (1) - Remove
Use a small flat-bladed tool at the top of the rear compartment lid hinge cover (1) to release the hinge cover retainer (2) on both sides of the vehicle.
- Rear Compartment Lid Hinge Cover (1) - Reposition [ 2x ]
Use a flat-bladed plastic tool to disengage the push-in retainers from the sheet metal.
- Rear Compartment Lid Inner Panel Trim (1) - Remove
Disconnect the electrical connector.
- Rearview Camera Nut (1) - Remove [ 3x ]
- Rearview Driver Information Camera (2) - Remove
NOTE:
The rear compartment lid hinge cover does not need to be removed from the vehicle.
NOTE:
Observe the mounting and location of the rearview driver information camera to ensure proper reinstallation.