FixVault

N212344140 Abs Module Internally Damaged (N212344140)

WARNING: This page is about the Traverse High Country, 4WD, which is a different variant/trim than selected.
Publication date: 2022-02-14
Reference number: N212344140

N212344140 ABS MODULE INTERNALLY DAMAGED

N212344140 ABS MODULE INTERNALLY DAMAGED

SERVICE CAMPAIGN BULLETIN

Reference Number(s): N212344140, Date of Issue:  Feb 14, 2022
Affected Model(s): 2021 Buick Enclave 2021 Chevrolet Traverse

SERVICE INFORMATION

Release Date:  February 2022 Revision:  00
Attention:  This service update includes vehicles in dealer inventory and customer vehicles that return to the dealership for any reason. This bulletin will expire at the end of the involved vehicle's New Vehicle Limited Warranty period.
Make  Model  Model Year  RPO  Description 
From  To 
Buick Enclave 2021 2021    
Chevrolet Traverse    

Involved vehicles are marked "open" on the Investigate Vehicle History screen in GM Global Warranty Management system. This site should always be checked to confirm vehicle involvement prior to beginning any required inspections and/or repairs.

Condition  Certain 2021 model year Buick Enclave and Chevrolet Traverse vehicles may have a damaged connector pin/terminal on the Anti-Lock Braking System module. A damaged connector pin/terminal could result in a loss of ABS/Stabilitrak function.
Correction  Dealers will replace the Electronic Brake Control Module and Brake Pressure Modulator.

PARTS INFORMATION

SERVICE INFORMATION

Quantity Part Name Part No.
1 Electronic Brake Control Module and Brake Pressure Modulator Valve kit 85138497
3 Brake Fluid (pints) US: 19353126
Export: Obtain Locally
NOTE:

Use the VIN and the GM Electronic Parts Catalog (EPC) to determine which parts to order.

Due to the small number of vehicles involved, (138),and due to limited initial parts availability, dealers are encouraged not to order parts for use as shelf stock.

Reminder:  Parts may be removed from Retail Inventory Management (RIM). Dealers should review the affected parts to confirm RIM managed status. Parts may have quantity limiters in effect.

WARRANTY INFORMATION

SERVICE INFORMATION

Labor Operation  Description  Labor Time  Trans. Type  Net Item 
9106040 Electronic Brake Control Module with Brake Pressure Modulator Valve Replacement - Includes Brake Bleeding 2.3 ZFAT N/A

SERVICE PROCEDURE

Replace the Electronic Brake Control Module and Brake Pressure Modulator. Refer to Electronic Brake Control Module with Brake Pressure Modulator Valve Replacement  in SI.

DEALER RESPONSIBILITY

Whenever a vehicle subject to this service update enters your vehicle inventory, or is in your facility for service in the future, and the vehicle is still covered under the New Vehicle Limited Warranty, you must take the steps necessary to be sure the service update correction has been made before selling or releasing the vehicle.

All new, used, GM Certified Used, courtesy transportation vehicles, dealer shuttle vehicles, etc. in dealers' possession and subject to this bulletin must  be held and inspected/repaired per the service procedure of this bulletin before  customers take possession of these vehicles. Involved vehicles must be held and not delivered to customers, dealer-traded, released to auction, used for demonstration, or any other purpose.

All GM Certified Used vehicles currently in the dealers' inventory within the Certified Pre-Owned Inventory System (CPOIS) will be de-certified and must be held and remedied per the service procedure in this bulletin. Upon submitting an accepted/paid warranty transaction in the Global Warranty Management (GWM) system, the vehicle can be re-certified for sale within the CPOIS system, or once again be used in the CTP program.

DEALER REPORTS

The Inventory tab of the Open Vehicle Report will contain Service Update Bulletin VINs that apply to this field action. This information is intended to assist dealers with the PROMPT COMPLETION  of these vehicles. The Customer In-Service tab will not contain Service Update Bulletin VIN data because the intent of a Service Update Bulletin is to not inconvenience a customer with a special trip for service. Service Update Bulletins are to be completed when the customer is in for a regularly scheduled visit.