Removal Procedure
WARNING: This page is about a different car, the 2020 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
Windshield Multifunction Sensor Mount Bracket Cover Insert (1) - Remove
Using a suitable plastic trim tool, carefully pry downward on the windshield multifunction sensor mount bracket cover (1) to release it from the windshield.
- Pull downward to remove the windshield multifunction sensor mount bracket cover (1) from the windshield.
Disconnect the electrical connector.
- Release the retaining tabs and rotate the front view camera (1) downward.
Slide the front view camera (1) rearward to release.
- Front View Camera (1) - Remove
NOTE:
Observe the mounting and location of the front view camera to ensure proper reinstallation.