FixVault
Home › Chevrolet › 2022 › Tahoe SSV › Repair and Diagnosis › Body & Frame › Body, Cab Control Systems › Vehicle Access - Repair Instructions › Repair Instructions › Rear Closure Hands Free Module Bracket Replacement › Installation Procedure

Installation Procedure

  1. GM5568973Courtesy of GENERAL MOTORS COMPANY

    Rear Closure Hands Free Module Bracket (1) - Install

  2. GM5568971Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Refer to Fastener Caution .

    Rear Closure Hands Free Module Bracket Bolt (1) - Install and tighten [2x] - Fastener Specifications

  3. Rear Closure Hands Free Module Retainer (2) - Install [2x]
  4. GM5541456Courtesy of GENERAL MOTORS COMPANY

    Rear Closure Hands Free Lamp (2) - Install

  5. Rear Closure Hands Free Module Bolt (1) - Install and tighten [2x] - Fastener Specifications
  6. GM5568823Courtesy of GENERAL MOTORS COMPANY

    Rear Closure Hands Free Module (2) - Install

  7. Rear Closure Hands Free Module Bolt (1) - Install and tighten - Fastener Specifications
  8. GM5568874Courtesy of GENERAL MOTORS COMPANY

    Rear Closure Hands Free Sensor (1) - Install

  9. Connect all electrical connectors.
  10. Lower the vehicle.
About FixVault