FixVault
Home › Chevrolet › 2022 › Tahoe SSV › Repair and Diagnosis › External Pages › Different car › Section 99 (Image Display Camera System) › Repair Instructions › Video Processing Module Replacement (Long Wheel Base) › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2021 Chevrolet Tahoe and 2021 Chevrolet Suburban. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM5582283Courtesy of GENERAL MOTORS COMPANY

    Video Processing Module (2) - Install

    2. CAUTION:

    Refer to Fastener Caution .

  2. Video Processing Module Nut (1) - Install and tighten [2x] - Fastener Specifications 
  3. Connect the electrical connectors.
  4. GM5580464Courtesy of GENERAL MOTORS COMPANY

    Install the wiring harness retainers, as needed.

  5. Quarter Lower Rear Trim Panel (1) - Install
  6. GM5580415Courtesy of GENERAL MOTORS COMPANY

    Cargo Tie Down Loop (4) - Install

  7. Cargo Tie Down Loop Bolt (3) - Install and tighten - Fastener Specifications
  8. Cargo Tie Down Loop Bolt Cap (2) - Close
  9. Convenience Net Retainer (1) - Install and tighten - Fastener Specifications
  10. GM5580384Courtesy of GENERAL MOTORS COMPANY

    3rd Row Seat Belt Retractor Bolt- Lower (1) - Install and tighten - Fastener Specifications

  11. GM5573150Courtesy of GENERAL MOTORS COMPANY

    Body Rear Corner Upper Garnish Molding (1) - Install

  12. GM5573149Courtesy of GENERAL MOTORS COMPANY

    Body Rear Corner Upper Garnish Molding Bolt (1) - Install and tighten - Fastener Specifications

  13. GM5572488Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Position the body side rear window garnish molding tether in the same position as before the molding removal.

    Body Side Rear Window Garnish Molding (1) - Install

  14. GM5569959Courtesy of GENERAL MOTORS COMPANY

    Body Lock Pillar Upper Trim Panel (1) - Install

  15. GM5569956Courtesy of GENERAL MOTORS COMPANY

    Quarter Window Trim Finish Panel Bolt (2) - Install and tighten - Fastener Specifications

  16. Quarter Window Trim Finish Panel Bolt Cap (1) - Install
  17. GM5569952Courtesy of GENERAL MOTORS COMPANY

    Rear Seat Belt Retractor Anchor Plate Bolt (2) - Install and tighten - Fastener Specifications

  18. Rear Seat Belt Retractor Sleeve (1) - Reposition
  19. GM5577844Courtesy of GENERAL MOTORS COMPANY

    Rear End Trim Finish Panel (1) - Install

  20. GM5577843Courtesy of GENERAL MOTORS COMPANY

    Liftgate Lock Striker Cover (1) - Install

  21. GM5577842Courtesy of GENERAL MOTORS COMPANY

    Liftgate Weatherstrip (1) - Reposition

  22. GM5607362Courtesy of GENERAL MOTORS COMPANY

    Return the rear seat (1) to the original position.

  23. GM5562688Courtesy of GENERAL MOTORS COMPANY

    Rear Side Door Sill Garnish Molding (1) - Install

  24. Enable the SIR System. SIR Disabling and Enabling
  25. GM5598917Courtesy of GENERAL MOTORS COMPANY

    3rd Row Seat (2) - Install - 3rd Row Seat Removal and Installation

  26. Perform the necessary programming and setup procedure: Control Module References
About FixVault