Installation Procedure

Courtesy of GENERAL MOTORS COMPANY

Fuel Feed Intermediate Pipe (3) - Install NEW
Fuel Feed Intermediate Pipe Nut (1) - Loosely install [2x]

CAUTION:

Fuel Feed Intermediate Pipe Bolt (2) - Install and tighten 8.5 N.m (75 lb in)
Component Fastener Tightening Caution
Fuel Feed Intermediate Pipe Nut (1) - Tighten 30 N.m (22 lb ft) [2x][2x]
Courtesy of GENERAL MOTORS COMPANY

Fuel Pump Cover - Install - Fuel Pump Cover Replacement
Air Cleaner Assembly - Install - Air Cleaner Assembly Replacement
Inspect for fuel leaks using the following procedure:
1. Turn ON the ignition with the engine OFF for 2 seconds.
2. Turn OFF the ignition for 10 seconds.
3. Turn ON the ignition with the engine OFF.
4. Inspect for fuel leaks.