Reusable Threaded Fastener Tightening Specifications

NOTE: All fasteners listed in this table can be reused after removal.
Application	Specification
Application	Metric (English)
Front Lower Control Arm Ball Stud Nut
First Pass:	40 N.m (30 lb ft)
Final Pass:	100 - 115 degrees
Front Stabilizer Shaft Link Nut	100 N.m (74 lb ft)
Front Strut Rod Mount Nut	70 N.m (52 lb ft)
Front Suspension Strut Bolt	22 N.m (16 lb ft)
Steering Knuckle Nut
First Pass:	100 N.m (74 lb ft)
Final Pass:	45 - 60 degrees