Circuit/System Verification

Ignition - On/Vehicle - In Service Mode
Verify no other DTCs are set.
- If other DTCs are set
  Refer to: Diagnostic Trouble Code (DTC) List - Vehicle
- Go to next step: If no other DTCs are set
Verify DTC P0513 is not set.
- If DTC P0513 is set
1. Perform the SPS function: Z1 Immobilizer Function
2. Follow the instructions on the scan tool.
3. Verify the control module programming is successful.
  - If the programming is not successful - Replace the component: K9 Body Control Module
  - Go to next step: If the programming is successful
- Go to next step: If no DTC is set
All OK.