Removal Procedure

Courtesy of GENERAL MOTORS COMPANY
NOTE:
- Inside of the accessory power receptacle there are two 3 mm (0.11 in) tab windows located 12 mm (0.47 in) from the front.
- The EL-42059 Cigar Lighter Socket Remover pushes the plastic latches from these tab windows.
- The EL-42059 Cigar Lighter Socket Remover will not fit straight into the receptacle. Angle it slightly for proper insertion.
Perform the following steps to remove the accessory power receptacle:
1. Place one side of the "T" portion of the EL-42059 Cigar Lighter Socket Remover into one tab window.
2. Place the other side of the "T" portion of the EL-42059 Cigar Lighter Socket Remover into the other tab window.
3. Spread the legs of the EL-42059 Cigar Lighter Socket Remover and pull the receptacle straight out.
Courtesy of GENERAL MOTORS COMPANY

If the EL-42059 Cigar Lighter Socket Remover tool fails to release the lighter socket from the retainer, perform the following alternate method:
1. Insert a small grinding tool with a cutoff wheel into the receptacle.
2. Grind the plastic latches in the 3 mm (0.11 in) tab windows.
3. Use the EL-42059 Cigar Lighter Socket Remover as directed above to remove the receptacle.
Disconnect the electrical connector.