Installation Procedure

Courtesy of GENERAL MOTORS COMPANY

Battery Tray (1) - Install
Courtesy of GENERAL MOTORS COMPANY

CAUTION:
Refer to Fastener Caution .

Battery Tray Bolt (1) - Install and tighten [4x] 11.5 N.m (102 lb in)
Courtesy of GENERAL MOTORS COMPANY

Drive Motor Battery Charger Receptacle Retainer (2) @Battery Tray - Install
Battery Positive Cable Retainer (1) @Battery Tray - Install [4x]
Courtesy of GENERAL MOTORS COMPANY

Engine Control Module (1) @Battery Tray - Install
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Use a battery lifting tool to install.

Battery (1) - Install
Courtesy of GENERAL MOTORS COMPANY

Battery Hold Down Retainer (2) - Install
Battery Hold Down Retainer Bolt (1) - Install and tighten - Battery Replacement
Courtesy of GENERAL MOTORS COMPANY

Battery Tray Support (2) - Install
Battery Tray Support Nut (1) - Install and tighten - Battery Replacement
Courtesy of GENERAL MOTORS COMPANY

Battery Positive Cable (3) @Battery Positive Post - Install
Battery Positive Cable Clamp Fastener (2) - Tighten - Battery Replacement
Battery Positive Cable Terminal Cover (1) - Install
Courtesy of GENERAL MOTORS COMPANY

Battery Tray Reinforcement (3) - Install
Battery Tray Reinforcement Bolt (2) - Install and tighten - Battery Replacement
Battery Tray Reinforcement Nut (1) - Install and tighten - Battery Replacement
Courtesy of GENERAL MOTORS COMPANY

Battery Current Sensor Connector (2) - Connect
Battery Current Sensor (1) @Battery Tray - Install
Courtesy of GENERAL MOTORS COMPANY

Battery Negative Cable Ground Nut (1) - Install and tighten - Battery Negative Cable Replacement (High Voltage Battery to Body Structure) Battery Negative Cable Replacement (12V Battery to Body Structure)
Connect the battery negative cable. Battery Negative Cable Disconnection and Connection