FixVault
Home › Chevrolet › 2024 › Traverse LS, 4WD › Repair and Diagnosis › Engine Performance › System › Engine Controls And Fuel - 2.5L (LK0) - Repair Instructions › Repair Instructions › Crankshaft Position Sensor Replacement › Removal Procedure

Removal Procedure

  1. Drain the cooling system. Cooling System Draining and Filling (GE 47716)
  2. Remove underbody panels as necessary. Underbody Panel Component Locator
  3. GM6401019Courtesy of GENERAL MOTORS COMPANY

    Hose Clamp (3) - Disengage - Hose Clamp Replacement Guidelines - Spring Type

  4. Water Pump Inlet Hose (4) @ Water Pump Module - Remove
  5. Hose Clamp (5) - Disengage - Hose Clamp Replacement Guidelines - Spring Type
  6. Water Pump Inlet Hose (4) @ Engine Oil Cooler - Remove
  7. GM6408900Courtesy of GENERAL MOTORS COMPANY

    Disconnect the electrical connector.

  8. Crankshaft Position Sensor Bolt (1) - Remove
  9. Crankshaft Position Sensor (2) - Remove
About FixVault