FixVault
Home › Chevrolet › 2024 › Traverse Z71 › Repair and Diagnosis › Engine Performance › System › Engine Controls And Fuel - 2.5L (LK0) - Repair Instructions › Repair Instructions › Fuel Tank Pressure Sensor Replacement (FWD) › Installation Procedure

Installation Procedure

  1. GM4292593Courtesy of GENERAL MOTORS COMPANY

    Fuel Tank Pressure Sensor (2) - Install

  2. Connect the electrical connector.
  3. Fuel Tank Pressure Sensor Cover (1) - Install
  4. GM5222729Courtesy of GENERAL MOTORS COMPANY

    Place a suitable adjustable jack under the fuel tank.

  5. Fuel Tank (1) - Install
  6. GM5222727Courtesy of GENERAL MOTORS COMPANY

    Fuel Tank Strap (2) - Install [2x]

    7. CAUTION:

    Refer to Fastener Caution .

  7. Fuel Tank Strap Bolt (1) - Install and tighten [4x] - Fastener Specifications
  8. GM5222726Courtesy of GENERAL MOTORS COMPANY

    Retainer (3) - Install

  9. Evaporative Emission Canister Vent Hose (2) - Connect - Plastic Collar Quick Connect Fitting Service 
  10. Fuel Pump Fuel Feed Hose (1) - Connect - Plastic Collar Quick Connect Fitting Service 
  11. GM5222725Courtesy of GENERAL MOTORS COMPANY

    Evaporative Emission Canister Vent Hose (4) - Connect - Plastic Collar Quick Connect Fitting Service 

  12. Fuel Tank Filler Hose (3) - Install
  13. Fuel Tank Filler Hose Clamp (2) - Tighten - Fastener Specifications
  14. Wiring Harness (1) - Connect
  15. Refill the fuel tank.
  16. Inspect for fuel leaks.
About FixVault