Installation Procedure
WARNING: This page is about a different car, the 2024 Chevrolet Silverado EV. However, it is still accessible from the selected car via links, so may be relevant.
Battery Charger (1) - Install
Drive Motor Battery Charger Bracket (3) - Move into position
- Drive Motor Battery Charger Ground Bolt (2) - Tighten [2x] - Fastener Specifications
- Drive Motor Battery Charger Bolt (1) - Install and tighten [3x] - Fastener Specifications
Drive Motor Battery Charger Bolt (1) - Install and tighten [4x] - Fastener Specifications
Connect the high voltage electrical connector. (3) High Voltage Connectors
- Drive Motor Battery Charger Inlet Hose (2) @ Battery Charger - Connect
- Retainer (1) - Engage
Connect the electrical connector. (3)
- Connect the high voltage electrical connector. (2) High Voltage Connectors
- Retainer (1) - Connect
Drive Motor Power Distribution Control Module Hose (2) @ Battery Charger - Connect
- Retainer (1) - Engage
- Rear Suspension Cradle - Install - Rear Suspension Cradle Removal and Installation (FE2) , or Rear Suspension Cradle Removal and Installation (F47)
CAUTION:
Refer to Fastener Caution .