FixVault
Home › Chevrolet › 2025 › Tahoe SSV › Repair and Diagnosis › Brakes › Traction Control › Antilock Brake System › Repair Instructions › Vehicle Stability Control System Switch Replacement (UV6) › Removal Procedure

Removal Procedure

  1. Disable the SIR system. SIR Disabling and Enabling
  2. GM6691829Courtesy of GENERAL MOTORS COMPANY

    Pull down the windshield garnish molding (1) rearwards to release the retaining clips (2) and the tether from the A pillar.

  3. Access the windshield garnish molding bolt (3) on the backside of the windshield garnish molding (1).
  4. Windshield Garnish Molding Bolt (3) - Remove
  5. GM6691831Courtesy of GENERAL MOTORS COMPANY

    Windshield Garnish Molding - Left Side (1) - Remove

  6. GM5549637Courtesy of GENERAL MOTORS COMPANY

    Reposition the weatherstrip as necessary.

  7. Windshield Pillar Assist Handle Cover (1) - Remove [2x]
  8. Windshield Pillar Assist Handle Bolt (2) - Remove [2x]
  9. Windshield Garnish Molding - Right Side (3) - Remove
  10. GM6714252Courtesy of GENERAL MOTORS COMPANY

    Using a flat bladed plastic trim tool, release the retaining clips.

  11. Instrument Panel Extension (1) - Remove
  12. GM6715560Courtesy of GENERAL MOTORS COMPANY

    Instrument Cluster Bolt (1) - Remove [4x]

  13. GM6715565Courtesy of GENERAL MOTORS COMPANY

    Using a flat bladed plastic trim tool, release the retaining clips.

  14. Disconnect the electrical connectors.
  15. Instrument Panel Cluster Control Module (1) - Remove
  16. GM6713431Courtesy of GENERAL MOTORS COMPANY

    Using a flat bladed plastic trim tool, release the retaining clips.

  17. Instrument Panel Fuse Block Access Hole Cover - Right Side (1) - Remove
  18. GM6715566Courtesy of GENERAL MOTORS COMPANY

    Instrument Panel Lower Trim Panel Bolt (1) - Remove

  19. GM6715567Courtesy of GENERAL MOTORS COMPANY

    Using a flat bladed plastic trim tool, release the retaining clips.

  20. Disconnect the electrical connector.
  21. Instrument Panel Center Trim Pad - Right Side (1) - Remove
  22. GM6715658Courtesy of GENERAL MOTORS COMPANY

    Instrument Panel Trim Plate Applique Bolt (1) - Remove [8x]

  23. GM6715659Courtesy of GENERAL MOTORS COMPANY

    Using a flat bladed plastic trim tool, release the retaining clips.

  24. Instrument Panel Trim Plate Applique - Right Side (1) - Remove
  25. GM6715569Courtesy of GENERAL MOTORS COMPANY

    Using a flat bladed plastic trim tool, release the retaining clips.

  26. Instrument Panel Upper Trim Panel Cover (1) - Remove
  27. GM6715571Courtesy of GENERAL MOTORS COMPANY

    Radio Control Bolt (1) - Remove [6x]

  28. GM6715572Courtesy of GENERAL MOTORS COMPANY

    Using a flat bladed plastic trim tool, release the retaining clips.

  29. Disconnect the electrical connectors.
  30. Radio Control (1) - Remove
  31. GM5515686Courtesy of GENERAL MOTORS COMPANY

    Instrument Panel Lower Trim Panel Outer Filler (1) - Remove

  32. GM6713322Courtesy of GENERAL MOTORS COMPANY

    Using a flat bladed plastic trim tool, release the retaining clips.

  33. Instrument Panel Outer Trim Cover - Left Side (1) - Remove
  34. GM6719747Courtesy of GENERAL MOTORS COMPANY

    Using a flat bladed plastic trim tool, release the retaining clips.

  35. Instrument Panel Trim Pad - Left Side (1) - Remove
  36. GM6719770Courtesy of GENERAL MOTORS COMPANY

    Using a flat bladed plastic trim tool, release the retaining clips.

  37. Instrument Panel Center Trim Pad - Left Side (1) - Remove
  38. GM6719805Courtesy of GENERAL MOTORS COMPANY

    Instrument Panel Outer Air Outlet Bolt (1) - Remove [3x]

  39. GM6719806Courtesy of GENERAL MOTORS COMPANY

    Using a flat bladed plastic trim tool, release the retaining clips.

  40. Disconnect the electrical connectors.
  41. Instrument Panel Outer Air Outlet - Left Side (1) - Remove
  42. GM6719959Courtesy of GENERAL MOTORS COMPANY

    Release the retaining tabs.

  43. Vehicle Stability Control System Switch (1) - Remove
About FixVault