FixVault
Home › Chevrolet › 2025 › Trax LS › Repair and Diagnosis › Accessories & Equipment › Collision/Avoidance › Driver Assistance Systems › Repair Instructions › Front View Camera Replacement › Removal Procedure

Removal Procedure

  1. GM5925431Courtesy of GENERAL MOTORS COMPANY

    Using a plastic trim tool, carefully pry downward on the cover to release from windshield.

  2. Squeeze tabs on insert and pull apart from cover.
    3. NOTE:

    The windshield multifunction sensor mount bracket cover and cover insert has to be removed as a single unit from the windshield surface to prevent damage to mirror.

  3. Windshield Multifunction Sensor Mount Bracket Cover Insert (1) - Remove
  4. GM5925432Courtesy of GENERAL MOTORS COMPANY

    Pull downward to completely remove the windshield multifunction sensor mount bracket cover (1) from windshield.

    5. NOTE:

    The windshield multifunction sensor mount bracket cover and cover insert has to be removed as a single unit from the windshield surface to prevent damage to mirror.

  5. Windshield Multifunction Sensor Mount Bracket Cover (1) - Remove
  6. GM5921972Courtesy of GENERAL MOTORS COMPANY

    Release the retaining tabs.

  7. Front View Camera (1) - Remove
  8. Disconnect the electrical connector.
About FixVault