Carburetor - HOLLEY 5220 2-Bbl: Reassembly

Reassemble carburetor in reverse order of disassembly and note the following:

1. Reinstall main jets, bleed jets, main well emulsion tubes and idle jets in proper locations.
2. To install power valve diaphragm, align 3 screw holes in diaphragm, body and cover. Hold stem and spring compressed against fuel bowl cover while installing and tightening screws.
3. Position wide open throttle cutout switch so A/C circuit will open when throttle lever is 10° before wide open throttle and stay open when throttle is in wide open position.