EFI Models
- Connect timing light and tachometer to the engine. Run engine until operating temperature is reached.
- Adjust idle RPM.
- At the timing hole in the bell housing, aim the timing light or read the magnetic timing unit. Adjust distributor to proper timing.
- Turn off engine, detach and attach positive battery quick disconnect. Start engine. The power loss lamp should be off. Reset idle speed if necessary.
- Turn off engine, then operate ignition on, off, on, off, on. On dash, power loss lamp should flash code numbers 88-51-55, signifying fault codes have been cleared.
IGNITION TIMING SPECIFICATIONS
| Application |
M/T |
A/T |
| 1.6L |
12 @ 850 |
12 @ 1000 |
| 2.2L |
| Federal |
| Rampage |
10 @ 850 |
10 @ 1000 |
| HO |
15 @ 850 |
N/A |
| EFI |
6 @ 850 |
6 @ 750 |
| Turbo |
12 @ 950 |
12 @ 950 |
| All Others |
10 @ 800 |
10 @ 900 |
| Calif. & High Alt. |
| Rampage |
10 @ 800 |
10 @ 900 |
| HO |
15 @ 850 |
N/A |
| EFI |
6 @ 850 |
6 @ 750 |
| Turbo |
12 @ 950 |
12 @ 950 |
| All Others |
10 @ 800 |
10 @ 900 |
| 2.6L |
N/A |
7 @ 800 |