FixVault
Home › Chrysler › 1988 › Conquest Automatic › Repair and Diagnosis › Accessories & Equipment › Cruise Control Systems › Testing › Actuator Check › Operation Check

Operation Check

  1. Connect positive battery terminal to terminal No. 3. Connect the negative battery terminal to terminals No. 1 and 2. See Figure . Apply vacuum to vacuum port of actuator. Accelerator cable should smoothly draw in and hold.
  2. Disconnect negative battery terminal from terminal No. 2. Accelerator cable should smoothly return to original position. Repeat procedure several times and ensure accelerator cable operates properly.
About FixVault