Bleeding Brake System: Notes

NOTE: During bleeding procedure, ensure fluid level remains close to full. Check fluid level periodically while bleeding system. Add DOT 3 brake fluid as required. Depressurize hydraulic accumulator before performing brake bleeding procedure to prevent personal injury and/or damage to painted surfaces. See ANTI-LOCK BRAKE SAFETY PRECAUTIONS article in GENERAL INFORMATION.

Air enters system whenever lines, hoses, calipers or hydraulic assembly are disconnected for service. ABS must be bled if air has entered system. Air inside brake system may set a primary pressure/delta pressure fault in the Controller Anti-Lock Brake (CAB). Refer to DIAGNOSIS & TESTING .