CONFIGURE Mode
- This mode allows user to customize DRB-II display. For example, if metric system is more useful, simply select METRIC from the appropriate menu. All selections made under CONFIGURE mode will remain active until user changes selection.
- Enter DRB-II main menu in order to access CONFIGURE mode. See ENTERING DRB-II MAIN MENU. At DRB-II main menu, press "3" (CONFIGURE) key. Press ENTER key. DRB-II will display CONFIGURE menu.
NOTE:
Because DRB-II is grounded through data link connector, only one volt-ohmmeter test lead is required when using volt-ohmmeter mode. DRB-II volt-ohmmeter should only be used when required by self-diagnostic tests.