Test 1A - Identifying Traveler Problems
NOTE:
For connector terminal identification, see CONNECTOR IDENTIFICATION. For wiring diagram, see WIRING DIAGRAMS at the end of this article.
The following traveler module failures may occur. When diagnosing a vehicle with many apparent failures, start at top of table and perform the indicated test(s). See TEST 1A DIAGNOSTIC TEST DIRECTORY table. Failures may occur separately or in various combinations. After repairs, ensure that the failure or group of failures has been corrected.
TEST 1A DIAGNOSTIC TEST DIRECTORY (1)
| Problem | Perform Test No. | ||
|---|---|---|---|
| NO RESPONSE Message Or Blank Message Screen | 1B | ||
| Elapsed Time (ET) Inoperative Or Wrong | 1C | ||
| Traveler Displays F1-1 | 1D | ||
| ECO (AVERAGE) Inoperative Or Wrong | 1D | ||
| ECO (MPG) Inoperative Or Wrong | 1D | ||
| Odometer Inoperative Or Wrong | 1D | ||
| Traveler Illumination | 2A | ||
| Distance To Empty (DTE) Inoperative Or Wrong | 3A | ||
| Traveler Buttons | 4A | ||
| Display Segment Problem | 6A | ||
|
|||