FixVault
Home › Chrysler › 1994 › LHS › Repair and Diagnosis › Brakes › Traction Control › Anti-Lock Brake System › Self-Diagnostic Tests › Test VER-1A - System Verification Test

Test VER-1A - System Verification Test

NOTE: For connector terminal identification, see CONNECTOR IDENTIFICATION. For wiring diagram, see WIRING DIAGRAM.
  1. Turn ignition off. Connect all previously disconnected connectors. Using DRB, erase all fault messages. Turn ignition on. If any fault messages are displayed, go to TEST 1A. If no fault messages are displayed, go to next step.
    CAUTION: Ensure braking capability is available before road testing vehicle.
  2. Using DRB, read fault messages at start-up. Start engine. If no fault messages are displayed, road test vehicle for at least 5 minutes. Perform several anti-lock braking stops and traction control starts. Using DRB, read fault messages again. If any fault messages are displayed, go to TEST 1A. If no fault messages are displayed and customer's complaint cannot be duplicated, repair is complete.
About FixVault