FixVault
Home › Chrysler › 1994 › LHS › Repair and Diagnosis › Electrical › Charging Systems › Alternator & Regulator › Self-Diagnostic System › Entering On-Board Diagnostics › Erasing Trouble Codes Using DRB

Erasing Trouble Codes Using DRB

  1. Record all trouble codes before erasing. Press ATM key. At DRB display, press "2" (ERASE) key. DRB will display: ERASE TROUBLE CODES ARE YOU SURE? (ENTER TO ERASE). Press ENTER key to erase all trouble codes.
  2. When DRB is finished erasing trouble codes, it will display TROUBLE CODES ERASED. This display will remain until ATM key is pressed. After ATM key is pressed, display will return to CHARGING MENU screen.
About FixVault