FixVault
Home › Chrysler › 1994 › LHS › Repair and Diagnosis › Transmission › Automatic Trans › Overhaul - 42LE Automatic Transmission › Torque Converter › Torque Converter Clutch Break-In Procedure › Break-In Procedure

Break-In Procedure

  1. Connect DRB to data link connector, located under driver's side of instrument panel. Using proper cartridge and DRB manufacturer's instructions, move through menu selections to access 42LE menu. Select ADJUSTMENTS function.
  2. Select RESET LU CLUTCH function. DRB will now display the break-in status, such as START, IN-PROGRESS or COMPLETE. If START is displayed, no further action is required.
  3. If IN-PROGRESS or COMPLETE is displayed, press ENTER key to return break-in procedure to the START stage. Press ENTER key again. The DRB will now display RESET LU CLUTCH ARE YOU SURE. Press ENTER key again. Break-in procedure should now be reset. The DRB should display that LU CLUTCH break-in status has been reset to START. Remove DRB.
About FixVault