FixVault
Home › Chrysler › 1994 › LeBaron GTC › Repair and Diagnosis › External Pages › Different variant/trim › Section 1 (Traveler Module) › Diagnostic Charts › Test 4A - Traveler Button Problem

Test 4A - Traveler Button Problem

WARNING: This page is about a different variant/trim than selected.
  1. Using DRB, read traveler switch status. If DRB displays CIRCUIT CLOSED for the STEP or US/M buttons, replace traveler module. If DRB does not display CIRCUIT CLOSED for the STEP or US/M buttons, go to next step.
  2. Press STEP button on traveler module. If DRB does not display CIRCUIT CLOSED, replace traveler module. If DRB displays CIRCUIT CLOSED, go to next step.
  3. Press US/M button on traveler module. If DRB does not display CIRCUIT CLOSED, replace traveler module. If DRB displays CIRCUIT CLOSED, system is operating properly at this time.
About FixVault