FixVault
Home › Chrysler › 1995 › Cirrus LXi › Repair and Diagnosis › Brakes › Traction Control › Anti-Lock Brake System › Bleeding Brake System › Bleeding Procedures › Pressure Bleeding

Pressure Bleeding

  1. Clean master cylinder cap and surrounding area. Remove cap. With pressure tank at least half full, connect tank to master cylinder using Bleeder Tank Tool (C-3496) with proper adapter(s).
  2. Attach bleeder hose to bleeder valve at first wheel to be serviced. See BLEEDING SEQUENCE. Place other end of hose in clean transparent container. Partially fill container with clean brake fluid. Submerge end of hose in fluid.
  3. Open release valve on pressure bleeder. Open bleeder valve 1-2 turns, noting fluid flow. When flow is clear and free of bubbles, close bleeder valve securely.
  4. Repeat procedure for remaining bleeder valves in sequence. See BLEEDING SEQUENCE. Close release valve on pressure bleeder. Remove pressure tank from master cylinder. Check fluid level of master cylinder reservoir.
About FixVault