FixVault
Home › Chrysler › 1995 › Cirrus LXi › Repair and Diagnosis › Engine Performance › System › Engine Controls - Tests W/Codes - Body Control Computer › Vehicle Communications Tests › Test 7E - Bus Short To Battery

Test 7E - Bus Short To Battery

NOTE: For connector terminal identification, see CONNECTOR IDENTIFICATION  . For wiring diagrams, see article in ENGINE PERFORMANCE:

WIRING DIAGRAMS - 2.0L & 2.4L

After each repair, perform TEST VER-1.

  1. Use scan tool in ohmmeter mode to check resistance of instrument cluster Red connector terminal No. 4 (Black/Light Green wire). If resistance is more than 5 ohms, repair open Black/Light Green wire. If resistance is less than 5 ohms, go to next step.
  2. Check resistance of Blue instrument cluster connector terminal No. 11 (Black/Orange wire). If resistance is more than 5 ohms, repair open Black/Orange wire. If resistance is less than 5 ohms, replace instrument cluster.
About FixVault