Cruise Control Switches
Access cruise control switches. Disconnect both cruise control switch 2-pin connectors. Using an ohmmeter, check both cruise control switches. If either cruise control switch does not test as specified, replace defective switch. See TESTING CRUISE CONTROL SWITCHES table. See CONNECTOR IDENTIFICATION.
TESTING CRUISE CONTROL SWITCHES
| Switch Position |
Check Between Terminals No. |
Ohms |
| ON/CRUISE/OFF Switch |
|
1 & 2 |
22,351-22,848 |
| OFF |
1 & 2 |
0-.5 |
| ON |
1 & 2 |
644-668 |
| SET/RESUME Switch |
|
1 & 2 |
|
| RES/ACCEL |
1 & 2 |
5558-5682 |
| SET/COAST |
1 & 2 |
1978-2022 |