Pretest Inspection
WARNING: This page is about a different car, the 1995 Plymouth Acclaim and 1995 Dodge Spirit. However, it is still accessible from the selected car via links, so may be relevant.
Before proceeding with diagnosis, the following precautions must be followed:
- Ensure self-diagnostic tests apply to vehicle being tested. See BODY CONTROL COMPUTER TESTS DIRECTORY table.
- Vehicle must have a fully charged battery and functional charging system.
- Always start at TEST 1A: IDENTIFYING VEHICLE EQUIPMENT & SYSTEM PROBLEMS. Starting with any other test may result in incorrect results.
- Only perform test steps indicated. It is NOT necessary to perform all steps in a test.
- Always start at TEST 1A .
- Turn ignition switch to OFF position before disconnecting or connecting components.
- Use extreme care when connecting or disconnecting wiring during testing to prevent accidental grounding or shorting.
- DO NOT use a test light in place of a voltmeter.
- Always disconnect scan tool after use.
- Always disconnect scan tool before charging battery.
- Always perform TEST VER-1 after repairs are made.