FixVault
Home › Chrysler › 1995 › LeBaron › Repair and Diagnosis › External Pages › Different car › Section 33 (A/C-Heater System - Automatic) › Testing › A/C System Charge Level Test › Vehicle Preparation

Vehicle Preparation

WARNING: This page is about a different car, the 1994 Eagle Vision, 1994 Dodge Intrepid, 1994 Chrysler New Yorker, 1994 Chrysler LHS, and 1994 Chrysler Concorde. However, it is still accessible from the selected car via links, so may be relevant.
  1. Set parking brake. Set shift lever to Park position. Start and idle engine at 700 RPM. Set A/C controls to outside air, panel (vent) mode, full cool, and A/C button on. Set blower to high speed. Open windows. Set recirculated air button to off position.
  2. Operate system for a few minutes to allow system to stabilize. Place a piece of cardboard over front part of condenser to maintain A/C pressure at 260 psi (18.3 kg/cm2 ). This will stop cooling fans from alternating speeds and maintain a constant pressure.
About FixVault