Front Wheel Speed Sensor: Installation
WARNING: This page is about a different car, the 1994 Eagle Vision, 1994 Dodge Intrepid, 1994 Chrysler New Yorker, 1994 Chrysler LHS, and 1994 Chrysler Concorde. However, it is still accessible from the selected car via links, so may be relevant.
Ensure knuckle sensor hole is clean. Before installing sensor into housing hole, lightly coat sensor with non-metallic, anti-seize compound, or high-temperature multipurpose grease. Tighten sensor screw to 60 INCH lbs. (7 N.m). There is no sensor air gap adjustment. To complete installation, reverse removal procedure.