FixVault
Home › Chrysler › 1995 › LeBaron › Repair and Diagnosis › External Pages › Different car › Section 80 (Anti-Lock Brake System) › Test 16C › System Relay Circuit

System Relay Circuit

WARNING: This page is about a different car, the 1995 Plymouth Acclaim and 1995 Dodge Spirit. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: For connector terminal identification, see CONNECTOR IDENTIFICATION. For wiring diagram, see wiring diagram.
  1. Ensure ABS relay connector is connected. Using scan tool, erase all trouble codes. Turn ignition off and then on. Using scan tool, read trouble codes. If scan tool does not display SYSTEM RELAY CIRCUIT, system relay circuit is operating properly at this time. Perform TEST VER-1A. If scan tool displays SYSTEM RELAY CIRCUIT, go to next step.
  2. Exchange ABS relay with a known-good like relay. Using scan tool, erase all trouble codes. Turn ignition off and then on. Using scan tool, read trouble codes. If scan tool displays SYSTEM RELAY CIRCUIT, replace CAB. Perform TEST VER-1A. If scan tool does not display SYSTEM RELAY CIRCUIT, system relay circuit is now operating properly. Replace ABS relay. Perform TEST VER-1A.
About FixVault