Checking System For Faults
WARNING: This page is about a different car, the 1995 Plymouth Acclaim and 1995 Dodge Spirit. However, it is still accessible from the selected car via links, so may be relevant.
- Using scan tool, read trouble codes. If scan tool is showing a blank message screen, go to TEST 18A. If scan tool is displaying NO RESPONSE message, go to TEST 17A.
- Press brake pedal, and check display on scan tool. If scan tool does not display proper reading of brake pedal, perform TEST VER-1B. If no trouble codes are present, turn ignition off and on. Using scan tool, read trouble codes. Monitor display for 4 minutes. If no trouble codes are present, perform TEST VER-1A. If trouble codes are present, go to next step.
- In some cases, cause of one trouble code may set additional trouble codes. If multiple trouble codes appear on scan tool, fault repairs must be performed in the order they appear in TROUBLE CODES table. If only one trouble code is set, perform indicated test for that trouble code.
TROUBLE CODES
| Trouble Code | Test No. | ||
|---|---|---|---|
| CAB | (1) | ||
| ANTILOCK WARNING LAMP DIODE CIRCUIT | 2A | ||
| ANTILOCK WARNING LAMP CIRCUIT | 3A | ||
| EXCESS DECAY | 4A | ||
| LF WHEEL SPEED SENSOR | 5A | ||
| LR WHEEL SPEED SENSOR | 6A | ||
| LF WHEEL SPEED SENSOR CONTINUITY | 7A | ||
| LR WHEEL SPEED SENSOR CONTINUITY | 8A | ||
| MODULATOR CIRCUIT | 9A | ||
| PUMP/MOTOR CIRCUIT | 10A | ||
| RF WHEEL SPEED SENSOR CONTINUITY | 11A | ||
| RF WHEEL SPEED SENSOR | 12A | ||
| RR WHEEL SPEED SENSOR | 13A | ||
| RR WHEEL SPEED SENSOR CONTINUITY | 14A | ||
| SOLENOID UNDERVOLTAGE | 15A | ||
| SYSTEM RELAY CIRCUIT | 16A | ||
| NO RESPONSE | 17A | ||
| Blank Screen | 18A | ||
|
|||