Intermittent Simulation

WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 1995 Plymouth Neon, 1995 Plymouth Acclaim, 1995 Eagle Vision, 1995 Eagle Talon, and 1995 Dodge Stratus. However, it is still accessible from the selected car via links, so may be relevant.

To reproduce the conditions creating an intermittent fault, use the following methods:

Lightly vibrate component.
Heat component.
Wiggle or bend wiring harness.
Spray component with water.
Remove/apply vacuum source.

Monitor circuit/component voltage or resistance while simulating intermittent. If engine is running, monitor for self-diagnostic codes. Use test results to identify a faulty component or circuit.