Test SC-1A - Checking Speed Control Operation
NOTE:
Use this test only if no speed control trouble codes are set.
- Go to next step.
- Turn ignition on. Using scan tool, monitor speed control switch inputs. While observing scan tool, press speed control ON switch. If scan tool displays SPEED CONTROL SWITCH ON, go to next step. If scan tool does not display SPEED CONTROL SWITCH ON, go to TEST SC-2A .
- While observing scan tool, press SET switch several times. If scan tool displays PRESSED OR RELEASED, go to next step. If scan tool does not display PRESSED OR RELEASED, go to TEST SC-3A .
- While observing scan tool, press RESUME switch several times. If scan tool displays PRESSED OR RELEASED, go to next step. If scan tool does not display PRESSED OR RELEASED, replace SET/RESUME switch. Perform TEST SC-VER .
- While observing scan tool, press CANCEL switch several times. If scan tool displays PRESSED OR RELEASED, go to next step. If scan tool does not display PRESSED OR RELEASED, replace CANCEL switch. Perform TEST SC-VER .
- While observing scan tool, press brake pedal several times. If scan tool displays PRESSED OR RELEASED, go to next step. If scan tool does not display PRESSED OR RELEASED, go to TEST SC-4A .
- While observing scan tool, move gear selector to Drive. If scan tool displays P/N SWITCH D/R, go to TEST SC-1B . If scan tool does not display P/N SWITCH D/R, go to TEST SC-5A .