Test 10B - No Response From Air Bag Control Module

NOTE: For connector terminal identification see CONNECTOR IDENTIFICATION . For wiring diagrams, see WIRING DIAGRAMS . Perform, after each repair, TEST VER-1A - VERIFICATION PROCEDURE .

CAUTION: Always turn ignition off prior to disconnecting any module connector.

Using external ohmmeter, measure resistance between ground and component side of fuse No. 17 (Light Green/Yellow wire). If resistance is less than 5 ohms, repair Light Green/Yellow wire between fuse and Air Bag Control Module (ACM) for short to ground. If resistance is 5 ohms or more, replace fuse.