FixVault
Home › Chrysler › 1998 › Sebring Limited › Repair and Diagnosis › External Pages › Different car › Section 2 (Charging System - Generators & Regulators) › Self-Diagnostic System › Retrieving DTCS › Using Scan Tool

Using Scan Tool

WARNING: This page is about a different car, the 1998 Plymouth Breeze, 1998 Dodge Stratus, and 1998 Chrysler Cirrus. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ensure battery is fully charged. Connect scan tool to Data Link Connector (DLC). DLC is located below instrument panel, near steering column.
  2. Using scan tool manufacturer's instructions, retrieve and record DTCs displayed on scan tool. Perform appropriate self-diagnostic test. See SELF-DIAGNOSTIC TESTS  . Once repairs are made, clear DTCs from PCM memory. See CLEARING  DTCs.
About FixVault