Transaxle Specifications
TRANSAXLE SPECIFICATIONS
| Application | Specification | |
|---|---|---|
| Clutch Clearances | ||
| Low-Reverse Clutch | .035-.041" (.89-1.04 mm) | |
| Overdrive Clutch | .054-.126" (1.36-3.19 mm) | |
| Reverse Clutch | .030-.049" (.76-1.24 mm) | |
| Underdrive Clutch | .036-.058" (.91-1.47 mm) | |
| 2-4 Clutch | .030-1.04" (.76-2.64 mm) | |
| Differential Rotating Torque With NEW Bearings ONLY | 19-23 INCH Lbs. (2.1-2.6 N.m) | |
| Input Shaft End Play | .005-.025" (.13-.64 mm) | |
| Oil Pump Clearances | ||
| Inner & Outer Gear Side Clearance | .0008-.0018" (.020-.046 mm) | |
| Outer Gear-To-Pocket Clearance | .0018-.0056" (.046-.142 mm) | |
| Output Shaft Rotating Torque For Bearing Preload | 1-8 INCH Lbs. (.1-.9 N.m) | |
| Ring Gear Backlash | .006-.009" (.15-.23 mm) | |
| Transfer Shaft Rotating Torque For Bearing Preload | 5-12 INCH Lbs. (.6-1.4 N.m) | |