MULTIFUNCTION Switch

Disconnect negative battery cable. Disconnect multifunction switch connector. Check continuity between appropriate switch terminals with switch in specified position. See MULTIFUNCTION SWITCH TESTING and WIPER/WASHER SWITCH CONTINUITY tables. See Fig 1 and Fig 2 . If continuity is not as specified, replace switch.

MULTIFUNCTION SWITCH TESTING

Switch Position

Continuity Between Terminals No.

Turn Signals

Neutral

⁽¹⁾

Left

6 & 7

Right

7 & 8

Hazards On

4 & 5; 6 & 7; 7 & 8

Head Lights

Low Beam

⁽¹⁾

High Beam

4 & 7

Flash-To-Pass

5 & 7

⁽¹⁾	Continuity should not exist between any terminals.

WIPER/WASHER SWITCH CONTINUITY

Switch Position

Between Terminals No.

K/Ohms

Off

1 & 3

300 Or More

Delay Level

1 & 3

9.72

1 & 3

8.22

1 & 3

6.61

1 & 3

5.12

1 & 3

3.67

1 & 3

2.22

Low

1 & 3

1.02

High

1 & 3

0.51

Wash

1 & 2

⁽¹⁾

⁽¹⁾	Continuity should exist.

Fig 1: Identifying Turn Signal & Hazard Flasher Switch Terminals

Courtesy of CHRYSLER CORP.

Fig 2: Identifying Dimmer & Wiper/Washer Switch Terminals

Courtesy of CHRYSLER CORP.