Fluid Capacities (Breeze, Cirrus & Stratus)

FLUID CAPACITIES (BREEZE, CIRRUS & STRATUS)

Application

⁽¹⁾ Quantity

Crankcase (Includes Filter) ⁽²⁾

2.0L

4.5 Qts. (4.3L)

2.4L

5.0 Qts. (4.7L)

2.5L

4.5 Qts. (4.3L)

Cooling System ⁽³⁾

2.0L

8.5 Qts. (8.0L)

2.4L

9.0 Qts. (8.5L)

2.5L

10.5 Qts. (10.0L)

Automatic Transaxle ⁽⁴⁾

Drain & Refill

⁽⁵⁾ 4.0 Qts. (3.8L)

Dry Refill

9.1 Qts. (8.6L)

Manual Transaxle ⁽⁶⁾

NV T350

2.2 Qts. (2.1L)

NV T350HD

2.6 Qts. (2.5L)

Power Steering Fluid ⁽⁷⁾

⁽⁸⁾

⁽¹⁾	Approximate quantity listed.

⁽²⁾	Use an API energy conserving engine oil that is certified for gasoline engines. Use 5W-30 (preferred) or 10W-30.

⁽³⁾	Quantity includes heater and coolant recovery tank.

⁽⁴⁾	Use Mopar® ATF+4, Type 9602.

⁽⁵⁾

Add this amount of fluid. Start engine and shift transaxle through all gears and back to Park. Add additional fluid to bring fluid level to 1/8" below the ADD mark on dipstick. Recheck fluid level with transaxle at normal operating temperature. Adjust fluid level so fluid level is within the HOT range on dipstick.

⁽⁶⁾	Use only Mopar® MS9417 manual transaxle fluid. Two different transaxles are used. Refer to capacity label near left driveshaft.

⁽⁷⁾	Use only Mopar® power steering fluid. DO NOT use automatic transmission fluid.

⁽⁸⁾	Capacity is not available from manufacturer.