DTC P0352: Ignition Coil #2 Primary Circuit: Description

Ignition coil primary circuit is monitored with battery voltage more than 8 volts during engine cranking or more than 12 volts with engine running at less than 2016 RPM, and no coils in dwell when checked. DTC will set in Powertrain Control Module (PCM) memory when PCM senses peak current is not achieved with battery based dwell plus 1.5 milliseconds of diagnostic offset. DTC P0352 takes less than 3 seconds to set with engine cranking, or up to 6 seconds with engine running. Possible causes for DTC to set are: defective ignition coil No. 2, defective PCM, defective connectors or defective wiring.