Installation - 40 Section
WARNING: This page is about a different car, the 2004 Dodge Intrepid, 2004 Chrysler Intrepid, 2004 Chrysler Concorde, and 2004 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
- Place seat back 40 section on pin.
- Install bolt attaching 40 section seat back to collar section. Tighten bolt to 16 N.m (12 ft. lbs.) torque.
- Install seat back collar assembly (Refer to INSTALLATION - 60/40 SEAT COLLAR ASSEMBLY ).