Right Mount: Installation
WARNING: This page is about a different car, the 2004 Dodge Intrepid, 2004 Chrysler Intrepid, and 2004 Chrysler Concorde. However, it is still accessible from the selected car via links, so may be relevant.
- Install isolator mount with heat shield onto the frame.
- Lower the engine onto the isolator mount.
- Remove jack from vehicle.
- Tighten the isolator to frame nuts to 61 N.m (45 ft. lbs.) (Figure).
- Install the upper attaching nuts to mount and tighten to 61 N.m (45 ft. lbs.) (Figure).
- Lower vehicle.