FixVault
Home › Chrysler › 2000 › Intrepid Base › Repair and Diagnosis › External Pages › Different car › Section 145 (2.7L Engine (Service Information)) › Oil Pressure Switch › Removal

Oil Pressure Switch: Removal

WARNING: This page is about a different car, the 2004 Dodge Intrepid, 2004 Chrysler Intrepid, and 2004 Chrysler Concorde. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise vehicle on hoist.
  2. Position an oil collecting container under switch location.
  3. Disconnect electrical connector.
  4. Remove switch by unscrewing from the engine block.
About FixVault