FixVault
Home › Chrysler › 2000 › Intrepid Base › Repair and Diagnosis › External Pages › Different car › Section 95 (Lighting Systems - Exterior) › Back Up Lamp › Removal

Back Up Lamp: Removal

WARNING: This page is about a different car, the 2004 Dodge Intrepid, 2004 Chrysler Intrepid, 2004 Chrysler Concorde, and 2004 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect and isolate the battery negative cable.
  2. Remove screws holding back up lamp unit to bumper.
  3. Separate back up lamp unit from bumper.
  4. Rotate lamp socket counterclockwise one quarter turn.
  5. Pull lamp socket from back of lamp unit.
  6. Pull lamp from lamp socket.
About FixVault