FixVault
Home › Chrysler › 2000 › Intrepid Base › Repair and Diagnosis › External Pages › Different car › Section 95 (Lighting Systems - Exterior) › Headlamp Switch › Removal

Headlamp Switch: Removal

WARNING: This page is about a different car, the 2004 Dodge Intrepid, 2004 Chrysler Intrepid, 2004 Chrysler Concorde, and 2004 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
  1. Open hood and disconnect the negative battery cable remote terminal from the remote battery post.
  2. Remove the left end cover, left instrument panel trim cover, and the cluster bezel. Refer to the various Removal and Installation procedures.
  3. Remove the three screws retaining headlamp switch to cluster bezel.
  4. Remove headlamp switch from bezel.
  5. Twist out lamp sockets are serviceable at this time. Ensure that the switch is seated against the pad.
About FixVault