Washer Pump Motor - Intrepid: Removal
WARNING: This page is about a different car, the 2004 Dodge Intrepid, 2004 Chrysler Intrepid, 2004 Chrysler Concorde, and 2004 Chrysler 300M. However, it is still accessible from the selected car via links, so may be relevant.
- Open hood and disconnect the negative battery cable remote terminal from the remote battery post.
- Remove the left headlamp assembly and set aside. Refer to HEADLAMP UNIT .
- Remove the four retaining bolts to the washer reservoir (Figure ).
- Disconnect the pump and sensor wire connectors.
- Disconnect the washer hose.
- Disconnect the washer filler hose.
- Pivot the inboard side of the reservoir forward and lift out of vehicle.
- Carefully pull the pump out of the reservoir (Figure ).
NOTE:
When replacing the pump, make sure to use a new grommet for proper sealing and to avoid leaks.